72
Using FTP
1. From FTP client view, download the system software image file (for example, msr2000.ipe) to
the CF card on the router.
ftp> get msr2000.ipe
msr2000.ipe already exists. Overwrite it? [Y/N]:y
227 Entering passive mode (192,168,1,100,5,20)
125 Using existing data connection
226 Closing data connection; File transfer successful.
37691392 bytes received in 17.7 seconds (2.03 Mbyte/s)
[ftp]
2. Return to user view.
[ftp]quit
221 Service closing control connection
<HPE>
Specifying the startup image file
1. Specify the msr2000.ipe file as the main image file at the next reboot.
<HPE>boot-loader file flash:/msr2000.ipe main
Images in IPE:
msr2000-cmw710-boot-a0005.bin
msr2000-cmw710-system-a0005.bin
msr2000-cmw710-security-a0005.bin
msr2000-cmw710-voice-a0005.bin
msr2000-cmw710-data-a0005.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to the device.
Successfully copied flash:/msr2000-cmw710-boot-a0005.bin to
flash:/msr2000-cmw710-boot-a0005.bin.
Successfully copied flash:/msr2000-cmw710-system-a0005.bin to
flash:/msr2000-cmw710-system-a0005.bin.
Successfully copied flash:/msr2000-cmw710-security-a0005.bin to
flash:/msr2000-cmw710-security-a0005.bin.
Successfully copied flash:/msr2000-cmw710-voice-a0005.bin to
flash:/msr2000-cmw710-voice-a0005.bin.
Successfully copied flash:/msr2000-cmw710-data-a0005.bin to
flash:/msr2000-cmw710-data-a0005.bin.
The images that have passed all examinations will be used as the main startup software
images at the next reboot on the device.
<HPE>
2. Verify that the file has been loaded.
To Next Page
Loading...
Need help?
General
