HPE MSR3000 - New Feature: Specifying a Band for a 4 G Modem; Command Reference; Lte Band

214
Use undo ppp user replace to restore the default.
Syntax
ppp user replace { imsi | sn }
undo ppp user replace
Default
The client username is used for authentication.
Views
Interface view
Predefined user roles
network-admin
Examples
# Replace the client username with the IMSI information for authentication.
<Sysname> system-view
[Sysname] interface virtual-template 1
[Sysname-Virtual-Template1] ppp user replace imsi
Related commands
•
ppp user accept-format imsi-sn split
•
ppp user attach-format imsi-sn split
New feature: Specifying a band for a 4G modem
You can specify a band for a 4G modem.
Command reference
lte band
Use ite band to specify a band for a 4G modem.
Use undo lte band to restore the default.
Syntax
lte band band-number
undo lte band
Default
The default setting varies by 4G modem model.