HPE MSR3000 - Modified Feature: ESP Encryption Algorithms; Feature Change Description; Command Changes; Modified Command: Esp Encryption-Algorithm

206
Use undo sip log enable to disable MSC logging.
Syntax
sip log enable
undo sip log enable
Default
MSC logging is disabled.
Views
Voice view
Predefined user roles
network-admin
Usage guidelines
This command enables the router to generate MSC logs and send the logs to the information center.
The information center outputs the logs to a destination according to an output rule. For more
information about the information center, see Network Management and Monitoring Configuration
Guide.
MSC logging is used for auditing purposes.
Examples
# Enable MSC logging.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip log enable
Modified feature: ESP encryption algorithms
Feature change description
Support for the CBC-mode SM4 algorithm was added for high encryption in non-FIPS mode.
Command changes
Modified command: esp encryption-algorithm
Old Syntax
High encryption (in non-FIPS mode):
esp encryption-algorithm { 3des-cbc | aes-cbc-128 | aes-cbc-192 | aes-cbc-256 | des-cbc | null
| sm1-cbc-128 | sm1-cbc-192 | sm1-cbc-256 } *