55
Resolved problems in CMW710-E0102
RTV7D000933
Symptom: The fragments can’t be filtered by ACL.
Condition: The fragments can’t be filtered by ACL when using fragment in the rule.
RTV7D000932
Symptom: The statuses of the router in the VRRP group are both Master when using MD5
authentication mode.
Condition: Using MD5 authentication mode.
Resolved problems in CMW710-E0006P02
CM13040119
Symptom: The devices testing failed for manufacture.
Condition: Test for manufacturing devices.
Support and other resources
Accessing Hewlett Packard Enterprise Support
For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website:
www.hpe.com/assistance
To access documentation and support services, go to the Hewlett Packard Enterprise Support
Center website:
www.hpe.com/support/hpesc
Information to collect:
Technical support registration number (if applicable).
Product name, model or version, and serial number.
Operating system name and version.
Firmware version.
Error messages.
Product-specific reports and logs.
Add-on products or components.
Third-party products or components.
Documents
To find related documents, see the Hewlett Packard Enterprise Support Center website at
http://www.hpe.com/support/hpesc
.
Enter your product name or number and click Go. If necessary, select your product from the
resulting list.
For a complete list of acronyms and their definitions, see HPE FlexNetwork technology
acronyms.
To Next Page
Loading...
