HPE MSR3000 User Manual

82
cfa0:/msr4000-cmw710-system-e010305.bin
cfa0:/msr4000-cmw710-security-e010305.bin
cfa0:/msr4000-cmw710-voice-e010305.bin
cfa0:/msr4000-cmw710-data-e010305.bin
Main startup software images:
cfa0:/msr4000-cmw710-boot-e010305.bin
cfa0:/msr4000-cmw710-system-e010305.bin
cfa0:/msr4000-cmw710-security-e010305.bin
cfa0:/msr4000-cmw710-voice-e010305.bin
cfa0:/msr4000-cmw710-data-e010305.bin
Backup startup software images:
cfa0:/msr4000-cmw710-boot-e010203.bin
cfa0:/msr4000-cmw710-system-e010203.bin
cfa0:/msr4000-cmw710-security-e010203.bin
cfa0:/msr4000-cmw710-voice-e010203.bin
cfa0:/msr4000-cmw710-data-e010203.bin
The output shows that the standby MPU is running the new images.
Upgrading the active MPU
1. Specify the msr4000.ipe file as the main startup image file for the active MPU.
<HPE>boot-loader file msr4000.ipe slot 0 main
Verifying the IPE file and the images......Done.
HPE MSR4060 images in IPE:
msr4000-cmw710-boot-e010305.bin
msr4000-cmw710-system-e010305.bin
msr4000-cmw710-security-e010305.bin
msr4000-cmw710-voice-e010305.bin
msr4000-cmw710-data-e010305.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to slot 0.
Decompressing file msr4000-cmw710-boot-e010305.bin to
cfa0:/msr4000-cmw710-boot-e010
305.bin...............Done.
Decompressing file msr4000-cmw710-system-e010305.bin to
cfa0:/msr4000-cmw710-system-
e010305.bin..............................................Done.
Decompressing file msr4000-cmw710-security-e010305.bin to
cfa0:/msr4000-cmw710-secur
ity-e010305.bin...Done.
Decompressing file msr4000-cmw710-voice-e010305.bin to
cfa0:/msr4000-cmw710-voice-e0
10305.bin....Done.
Decompressing file msr4000-cmw710-data-e010305.bin to
cfa0:/msr4000-cmw710-data-e010
305.bin...Done.
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 0.
2. Reboot the active MPU.

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English