81
msr4000-cmw710-voice-e010305.bin
msr4000-cmw710-data-e010305.bin
This command will set the main startup software images. Continue? [Y/N]:y
Add images to slot 1.
Decompressing file msr4000-cmw710-boot-e010305.bin to
slot1#cfa0:/msr4000-cmw710-boo
t-e010305.bin...............Done.
Decompressing file msr4000-cmw710-system-e010305.bin to
slot1#cfa0:/msr4000-cmw710-s
ystem-e010305.bin...............................................Done.
Decompressing file msr4000-cmw710-security-e010305.bin to
slot1#cfa0:/msr4000-cmw710
-security-e010305.bin...Done.
Decompressing file msr4000-cmw710-voice-e010305.bin to
slot1#cfa0:/msr4000-cmw710-vo
ice-e010305.bin....Done.
Decompressing file msr4000-cmw710-data-e010305.bin to
slot1#cfa0:/msr4000-cmw710-dat
a-e010305.bin...Done.
The images that have passed all examinations will be used as the main startup so
ftware images at the next reboot on slot 1.
2. Reboot the standby MPU.
<HPE>reboot slot 1
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
3. After the standby MPU starts up, verify the startup image files.
<HPE>display boot-loader
Software images on slot 0:
Current software images:
cfa0:/msr4000-cmw710-boot-e010204.bin
cfa0:/msr4000-cmw710-system-e010204.bin
cfa0:/msr4000-cmw710-security-e010204.bin
cfa0:/msr4000-cmw710-voice-e010204.bin
cfa0:/msr4000-cmw710-data-e010204.bin
Main startup software images:
cfa0:/msr4000-cmw710-boot-e010204.bin
cfa0:/msr4000-cmw710-system-e010204.bin
cfa0:/msr4000-cmw710-security-e010204.bin
cfa0:/msr4000-cmw710-voice-e010204.bin
cfa0:/msr4000-cmw710-data-e010204.bin
Backup startup software images:
cfa0:/msr4000-cmw710-boot-e010203.bin
cfa0:/msr4000-cmw710-system-e010203.bin
cfa0:/msr4000-cmw710-security-e010203.bin
cfa0:/msr4000-cmw710-voice-e010203.bin
cfa0:/msr4000-cmw710-data-e010203.bin
Software images on slot 1:
Current software images:
cfa0:/msr4000-cmw710-boot-e010305.bin
To Next Page
Loading...
Need help?
General
