57
New feature: Disabling transceiver module alarm
Configuring Disabling transceiver module alarm
The device regularly checks transceiver modules for their vendor information. If a transceiver module
does not have a vendor name or the vendor name is not HPE, the device outputs traps and logs to
prompt you to replace the module. This feature enables you to suppress the traps and logs.
Command reference
New command: transceiver phony-alarm-disable
Use transceiver phony-alarm-disable to disable the transceiver module alarm feature.
Use undo transceiver phony-alarm-disable to restore the default.
Syntax
transceiver phony-alarm-disable
undo transceiver phony-alarm-disable
Default
The transceiver module alarm feature is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The device regularly checks transceiver modules for their vendor information. If a transceiver module
does not have a vendor name or the vendor name is not HPE, the device outputs traps and logs to
prompt you to replace the module. To suppress the traps and alarms, execute this command.
Examples
#Disable the transceiver module alarm feature.
<Sysname> system-view
[Sysname] transceiver phony-alarm-disable
To Next Page
Loading...
Need help?
General
