121
Usage guidelines
Deleting an IKEv2 SA will also delete the child SAs negotiated through the IKEv2 SA.
If you do not specify any parameters, this command deletes all IKEv2 SAs and the child SAs
negotiated through the IKEv2 SAs.
Examples
# Display information about IKEv2 SAs.
<Sysname> display ikev2 sa
Tunnel ID Local Remote Status
--------------------------------------------------------------------
1 1.1.1.1/500 1.1.1.2/500 EST
2 2.2.2.1/500 2.2.2.2/500 EST
Status:
IN-NEGO: Negotiating EST: Established, DEL: Deleting
# Delete the IKEv2 SA whose remote IP address is 1.1.1.2.
<Sysname> reset ikev2 sa remote 1.1.1.2
# Display information about IKEv2 SAs again. Verify that the IKEv2 SA is deleted.
<Sysname> display ikev2 sa
Tunnel ID Local Remote Status
--------------------------------------------------------------------
2 2.2.2.1/500 2.2.2.2/500 EST
Status:
IN-NEGO: Negotiating EST: Established, DEL: Deleting
Related commands
display ikev2 sa
New command: reset ikev2 statistics
Use reset ikev2 statistics to clear IKEv2 statistics.
Syntax
reset ikev2 statistics
Views
Any view
Predefined user roles
network-admin
Examples
# Clear IKEv2 statistics.
<Sysname> reset ikev2 statistics
To Next Page
Loading...
Need help?
General
