HPE MSR3000 User Manual

89
Using XMODEM to upgrade software through the console
port
1. Enter 2 in the BootWare menu to access the Serial submenu.
===========================<Enter Serial SubMenu>===========================
|Note:the operating device is flash
|
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File
|
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Serial Interf
ace Parameter |
|<0> Exit To Main Menu |
===============
=============================================================
Enter your choice(0-4):
Table 23 Serial submenu options
Item
Description
<1> Download Application Program To SDRAM And
Run
Download an application to SDRAM through the
serial port and run the program.
<2> Update Main Image File Upgrade the main system software image.
<3> Update Backup Image File Upgrade the backup system software image.
<4>Download Files(*.*)
Download a system software image to the Flash or
CF card.
<5> Modify Serial Interface Parameter Modify serial port parameters
<0> Exit To Main Menu Return to the BootWare menu.
2. Select an appropriate baud rate for the console port. For example, enter 5 to select 115200 bps.
=============
==================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate |
|
Change The HyperTerminal's Baudrate Accordingly |
|---------------------------<Baudrate Available>---------------------------
|
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):
The following messages appear:
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
NOTE:
Typically the size of a .bin file is over 10 MB. Even at 115200 bps, the download takes about 30
minutes.

HPE MSR3000 Specifications

General

Brand	HPE
Model	MSR3000
Category	Network Router
Language	English