HPE MSR3000 - Command Reference; Modified Feature: Support Using Dots in User Profile Name; Feature Change Description; Command Changes

31
•
Setting the error packet ratio thresholds in a bit error continuity test.
•
Displaying two-way DM continuity test results.
•
Displaying one-way packet loss continuity test results.
•
Setting the test mode and action for triggering port association.
•
Displaying bit error test results.
Command reference
•
cfd dm two-way continual
•
cfd dm two-way threshold
•
cfd slm continual
•
cfd slm threshold
•
cfd slm port-trigger up-delay
•
cfd tst continual
•
cfd tst threshold
•
display cfd dm two-way history
•
display cfd slm history
•
cfd port-trigger
•
display cfd tst history
See HPE FlexNetwork MSR Router Series Command References(V7).
Modified feature: Support using dots in user profile
name
Feature change description
In this release, the user profile name supports using dots (.).
Command changes
Modified command: user-profile
Syntax
user-profile profile-name
undo user-profile profile-name
Views
System view