HPE MSR3000

48
Field
Description
hh:mm:ss.
Input
Statistics on received packets:
• packets—Total number of packets.
• data packets—Number of data packets.
• control packets—Number of control packets.
• multicasts—Number of multicast packets.
• errors—Number of error packets.
Output
Statistics on received packets:
• packets—Total number of packets.
• data packets—Number of data packets.
• control packets—Number of control packets.
• multicasts—Number of multicast packets.
• errors—Number of error packets.
New command: display nhrp map
Use display nhrp map to display information about NHRP mapping entries.
Syntax
display nhrp map [ interface tunnel interface-number [ peer ipv4-address ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command displays NHRP mapping table
information for all mGRE tunnel interfaces.
peer ipv4-address: Specifies a peer public address. If you do not specify this option, the command
displays NHRP mapping entries for all peers.
verbose: Displays detailed information about NHRP mapping entries. If you do not specify this
keyword, the command displays brief information about NHRP mapping entries.
Usage guidelines
If you do not specify any parameters, this command displays brief information about all NHRP
mapping entries.
Examples
# Display brief information about all NHRP mapping entries.
<Sysname> display nhrp map