HPE MSR3000 - New Command: Ssh2 Algorithm Mac

163
Related commands
•
display ssh2 algorithm
•
ssh2 algorithm cipher
•
ssh2 algorithm mac
•
ssh2 algorithm public-key
New command: ssh2 algorithm mac
Use ssh2 algorithm mac to specify MAC algorithms for SSH2.
Use undo ssh2 algorithm mac to restore the default.
Syntax
In non-FIPS mode:
ssh2 algorithm mac { md5 | md5-96 | sha1 | sha1-96 | sha2-256 | sha2-512 } *
undo ssh2 algorithm mac
In FIPS mode:
ssh2 algorithm mac { sha1 | sha1-96 | sha2-256 | sha2-512 } *
undo ssh2 algorithm mac
Default
SSH2 uses the MAC algorithms sha2-256, sha2-512, sha1, md5, sha1-96, and md5-96 in
descending order of priority for algorithm negotiation.
Views
System view
Predefined user roles
network-admin
Parameters
md5: Specifies the HMAC algorithm hmac-md5.
md5-96: Specifies the HMAC algorithm hmac-md5-96.
sha1: Specifies the HMAC algorithm hmac-sha1.
sha1-96: Specifies the HMAC algorithm hmac-sha1-96.
sha2-256: Specifies the HMAC algorithm hmac-sha2-256.
sha2-512: Specifies the HMAC algorithm hmac-sha2-512.
Usage guidelines
If you specify the MAC algorithms, SSH2 uses only the specified algorithms for algorithm negotiation.
The algorithm specified earlier has a higher priority during negotiation.