EasyManuals Logo

HPE MSR3000 User Manual

HPE MSR3000
371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #358 background imageLoading...
Page #358 background image
252
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] import-route static cost 4
Related commands
default cost
import-route (OSPF view)
Use import-route to redistribute AS-external routes from another routing protocol.
Use undo import-route to disable route redistribution from another routing protocol.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ allow-direct | cost cost |
nssa-only | route-policy route-policy-name | tag tag | type type ] *
undo import-route protocol [ process-id | all-processes ]
Default
OSPF does not redistribute AS-external routes from any other routing protocol.
Views
OSPF view
Predefined user roles
network-admin
Parameters
protocol: Redistributes routes from the specified protocol, which can be bgp, direct, isis, ospf, rip,
or static.
process-id: Specifies a process by its ID in the range of 1 to 65535. The default is 1. It is available
only when the protocol is rip, ospf, or isis.
all-processes: Redistributes routes from all the processes of the specified routing protocol. This
keyword takes effect only when the protocol is rip, ospf, or isis.
allow-ibgp: Redistributes IBGP routes. It is available only when the protocol is bgp.
allow-direct: Redistributes the networks of the local interfaces enabled with the specified routing
protocol. By default, the networks of the local interfaces are not redistributed. If you specify both the
allow-direct keyword and the route-policy route-policy-name option, make sure the if-match rule
defined in the routing policy does not conflict with the allow-direct keyword. For example, if you
specify the allow-direct keyword, do not configure the if-match route-type rule for the routing policy.
Otherwise, the allow-direct keyword does not take effect.
cost cost: Specifies a route cost in the range of 0 to 16777214. The default is 1.
nssa-only: Limits the route advertisement to the NSSA area by setting the P-bit of Type-7 LSAs to 0.
By default, the P-bit of Type-7 LSAs is set to 1. If the router acts as both an ASBR and an ABR and

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE MSR3000 and is the answer not in the manual?

HPE MSR3000 Specifications

General IconGeneral
BrandHPE
ModelMSR3000
CategoryNetwork Router
LanguageEnglish

Related product manuals