To Next Page

To Previous Page

219

Predefined user roles

network-admin

Parameters

mki-length: Specifies the length of the MKI field, in the range of 1 to 128 bits.

Usage guidelines

This command takes effect only when SRTP is the media stream protocol for SIP calls. To specify

SRTP as the medial stream protocol for SIP calls, use the srtp command.

Examples

# Add the MKI field to outgoing SRTP or SRTCP packets and set the length of the MKI field to 1 bit.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] sip

[Sysname-voice-sip] mki 1

New feature: SIP domain name

This feature enables the router to populate the CONTACT header field of outgoing SIP packets with

the router's SIP domain name.

Command reference

sip-domain

Use sip-domain to populate the CONTACT header field of outgoing SIP packets with the router's

SIP domain name.

Use undo sip-domain to restore the default.

Syntax

sip-domain domain-name

undo sip-domain

Default

The router populates the CONTACT header field of an outgoing SIP packet with the IP address of the

outgoing interface.

Views

SIP view

Predefined user roles

network-admin

HPE MSR3000 User Manual

Questions and Answers: