HPE MSR3000 - New Command: Nhrp Authentication

51
Resolution replies : 0
Registration requests : 0
Registration replies : 3
Purge requests : 0
Purge replies : 0
Error indications : 0
Traffic indications : 0
NHRP packets received : 3
Resolution requests : 0
Resolution replies : 0
Registration requests : 3
Registration replies : 0
Purge requests : 0
Purge replies : 0
Error indications : 0
Traffic indications : 0
# Display NHRP packet statistics for the specified tunnel interface.
<Sysname> display nhrp statistics interface tunnel 0
Tunnel0:
NHRP packets sent : 815
Resolution requests : 15
Resolution replies : 1
Registration requests : 0
Registration replies : 797
Purge requests : 2
Purge replies : 0
Error indications : 0
Traffic indications : 0
NHRP packets received : 1453
Resolution requests : 15
Resolution replies : 1
Registration requests : 1435
Registration replies : 2
Purge requests : 0
Purge replies : 0
Error indications : 0
Traffic indications : 0
New command: nhrp authentication
Use nhrp authentication to configure an NHRP packet authentication key.
Use undo nhrp authentication to restore the default.
Syntax
nhrp authentication { cipher | simple } string