88
Local window: 1
Remote window: 1
Local request message ID: 2
Remote request message ID: 2
Local next message ID: 0
Remote next message ID: 0
Pushed IP address: 192.168.1.5
Assigned IP address: 192.168.2.24
Table 8 Command output
Tunnel ID ID of the IPsec tunnel to which the IKEv2 SA belongs.
Local IP/Port IP address and port number of the local security gateway.
Remote IP/Port IP address and port number of the remote security gateway.
Outside VRF
Name of the VPN instance to which the protected outbound
data flow belongs.
If the protected outbound data flow belongs to the public
network, this field displays a hyphen (
).
Inside VRF
Name of the VPN instance to which the protected inbound data
flow belongs.
If the protected inbound data flow belongs to the public
network, this field displays a hyphen (
-
).
Local SPI SPI that the local end uses.
Remote SPI SPI that the remote end uses.
Local ID type ID type of the local security gateway.
Local ID ID of the local security gateway.
Remote ID type ID type of the remote security gateway.
Remote ID ID of the remote security gateway.
Auth sign method
Signature method that the IKEv2 proposal uses in
authentication.
Auth verify method
Verification method that the IKEv2 proposal uses in
authentication.
Integrity algorithm Integrity protection algorithms that the IKEv2 proposal uses.
PRF algorithm PRF algorithms that the IKEv2 proposal uses.
Encryption algorithm Encryption algorithms that the IKEv2 proposal uses.
Life duration Lifetime of the IKEv2 SA, in seconds.
Remaining key duration Remaining lifetime of the IKEv2 SA, in seconds.
Diffie-Hellman group DH groups used in IKEv2 key negotiation.
NAT traversal
Whether a NAT gateway is detected between the local and
remote ends.
DPD
DPD settings:
• Detection interval in seconds.
• Retry interval in seconds.
To Next Page
Loading...
Need help?
General
