1 Preliminary information
16
HSD S.p.A. © - h0101k01a.fm120718
1.2 Symbols used in the manual
The parts of the text requiring special attention are highlighted and preceded by the symbols
illustrated and explained below.
Danger
Indicates a procedure, practice or similar action that could cause injury if not
respected or carried out correctly.
Caution
Indicates an operating procedure, practice or similar action that could damage or
completely destroy the product if not respected or carried out correctly.
Information
Highlights particularly important information of a general nature that must not be ignored.
1.3 Documents supplied with the product
The supplied documents must be stored in an appropriate location and must always be readily
available for consultation.
The following is a list of the documents supplied with the product (unless otherwise agreed with the
customer).
Assembly instructions (this manual). It contains warnings and instructions for the transport,
installation, use, maintenance and disposal of the product. To consult it you need Adobe
®
Reader
®
(www.adobe.com) as it is supplied on a CD ROM.
Test report. Contains the testing results performed on the unit.
EC Conformity Declaration. This certifies that the product complies with the directives
indicated. It is only issued for machines sold in EEC and EFTA (European Free Trade
Association) countries.
Check that all the documents listed above are present on delivery of the product. If necessary,
further copies can be obtained on request from the manufacturer.
Annexes (if included). These contain additional information that completes and/or replaces
the information in the document with which they are enclosed.
To Next Page
Loading...
