4 Transport, packing, unpacking, storage
HSD S.p.A. © - h0103k01a.fm120718
89
4 Transport, packing, unpacking,
storage
4.1 Warnings
Product lifting and handling operations can create hazardous situations for the personnel
involved. Therefore, it is advisable to follow the instructions supplied by the manufacturer and
to use the appropriate equipment.
The installation and assembly operations must always be carried out by specialised
technicians only.
All the lifting and handling operations of the product and its parts must be performed with
extreme care, avoiding impacts that could compromise its operation or damage any coated
parts.
The user is responsible for selecting the lifting equipment (cables, straps or chains,
etc.) regarded as most suitable in terms of operation and capacity with respect to the
weight of the load indicated on the packing and on the product label.
For transportation and storage, products should be kept in their original packaging
until the time of assembly.
Storage conditions: a dry indoor place that is dust-free and vibration proof.
DANGER OF DEATH FOR THOSE WITH PACEMAKERS! These people must
maintain a sufficient safety distance from the rotor pack (in its packaging) -
minimum distance 0.5 m.
DANGER DUE TO HIGH MAGNETIC FORCES! Danger caused by the magnetic
field of the rotor pack! Do not approach with data support (for ex. discs, credit
cards, company cards), electronic circuits, clocks or other equipment which
is sensitive to the rotor.
Clearly mark the storage place with danger signs, in compliance with the packaging
of the integrated motors!
To Next Page
Loading...
