HSD ES779 - Identification of the Manufacturer and of the Product; Orders and Requests for Information; Glossary

1 Preliminary information
18
HSD S.p.A. © - h0101k01a.fm120718
1.4 Identification of the manufacturer and of the product
The name and address of the manufacturer are:
HSD S.p.A.
main headquarters: Via Pesaro, 10A - 61012 Gradara (PU) ITALY
registered offices: Via della Meccanica, 16 - 61122 Pesaro ITALY
The serial number represents the only means recognised by the manufacturer of identifying
the product. The product user is responsible for ensuring that the serial number remains intact.
The position of the product serial number is shown in paragraph
3.4 “General overview and main
parts”
.
An adhesive is applied to the product, bearing the address of the manufacturer's registered
offices.
1.5 Orders and requests for information
When requesting additional copies of the documentation supplied with the product or further
information on the documentation, services, assistance or machine parts, please send the request,
specifying:
 product model;
 name of dealer;
 specific information on any faults encountered;
 clear information on the machining operations to be carried out;
 periods of use.
1.6 Glossary
ISO 30
Tool holder cone connection
system, described in standard
DIN 69871.
The electrospindle carries a
plate similar to the one shown
alongside, indicating the type
of connection.
ISO30 DIN
69871 CONE
HSD SCREW
DOWEL
0804H0009
HSK
Tool-holder cone connection system, described in
standard DIN 69893.
The electrospindle carries a plate similar to the one
shown alongside, indicating the type of connection.
HSK
DIN 69893 CONE