2 Safety information
26
HSD S.p.A. © - h0115k01a.fm120718
2.5 Signs fixed to the product
The signs fixed to the product must never be removed for any reason whatsoever.
The signs must be clearly legible.
Damaged signs should be replaced (request new ones from the manufacturer).
Make sure the information plates are clearly legible. If this is not the case, replace
them with new ones in the same positions.
2.5.1 Danger signs
The general danger signs are described below.
2.5.2 Mandatory signs
The general mandatory signs are described below.
DANGER OF ELECTROCUTION! Do not enter the area when the machine is
energised. Before carrying out any operations on the electrical system, make
sure that the power supply has been turned off.
DANGER, HOT SURFACES! High temperature component, risk of burning. Wear
suitable protective clothing.
USER MANUAL! It is compulsory to read the whole user manual
before performing any operations.
To Next Page
Loading...
