5 Installation and commissioning
96
HSD S.p.A. © - h0104k01a.fm120718
5.5 Pneumatic connections
Check that the air supply system is suitable to the characteristics stated below.
The pneumatic connection points are shown in the paragraph
5.5.2 “Pneumatic connection points”
together with the technical features.
The air must have the characteristics stated in paragraph
5.5.1 “Compressed air specifications for
HSD products”
, so as not to compromise the functioning and condition of the product.
The pneumatic connection operations must be performed by specialised and suitably
trained personnel.
Before starting to make a pneumatic connection, check that the upstream valve is
closed and the system has been vented.
To Next Page
Loading...
