4 Transport, packing, unpacking, storage
HSD S.p.A. © - h0103k01a.fm120718
91
Lifting
The following figure illustrates the crate lifting methods to adopt using cables and a forklift. In the
case of a forklift, make sure that the centre of gravity of the crate is between the forks when lifting.
4.4 Unpacking
Check the crate is in good condition before opening it.
Remove the screws that fix the cover of the crate (A).
Open the crate and take out the foam rubber on top.
To carry out this step, the use of gloves is
advised.
Lift the product by hand gripping the motor. Special
equipment is not required.
Do not lift the equipment by means of the electric cables.
Do not lift the product by grasping the electric fan and/or plastic parts, as this could
damage the guard.
Do not rest the product on the electrospindle shaft.
The foam rubber and plastic wrapping should be disposed of as plastic material.
A
A
To Next Page
Loading...
