HT2800T_en_c.doc Page 63 of 275
5) (For HTA Autosampler Manager CFR 21 Part 11 version only). At the first access of the
software the activation licence is required (click on “Add” from figure “a”, tab “Licences”
enabled). Then Administrator creation is required (click on “Add” from figure “b”, tab “Users”
enabled). The screen “c” appears to add the administrator, then it will be possible to create the
other users.
Figure 64: HTA Autosampler Manager CFR 21 Part 11
6) From the following screen (tab “Instruments” enabled) click on “Add new”:
To Next Page
Loading...
