<SwitchA> display nqa results
NQA entry(test, jitter) :testflag is inactive ,testtype is jitter
 1 . Test 1 result   The test is finished
   Send operation times:3000            Receive response times:3000
   Completion :success                  RTD RTD OverThresholds number:25
   Min/Max/Avg/Sum RTT:1/26/1/3143      RTT  Square Sum:5665
   NumOfRTT:3000                        Drop operation number:0
   Operation sequence errors number:0   RTT Stats errors number:0
   System busy operation number:0       Operation timeout number:0
   Min Positive SD:1                    Min Positive DS:0
   Max Positive SD:27                   Max Positive DS:0
   Positive SD Number:1890              Positive DS Number:0
   Positive SD Sum:2128                 Positive DS Sum:0
   Positive SD Square Sum :4864         Positive DS Square Sum :0
   Min Negative SD:1                    Min Negative DS:1
   Max Negative SD:16                   Max Negative DS:2
   Negative SD Number:38                Negative DS Number:1936
   Negative SD Sum:129                  Negative DS Sum:1998
   Negative SD Square Sum :1445         Negative DS Square Sum :2122
   Min Delay SD:0                       Min Delay DS:0                          
   Avg Delay SD:0                       Avg Delay DS:0
   Max Delay SD:13                      Max Delay DS:12
   Packet Loss SD:0                     Packet Loss DS:0
   Packet Loss Unknown:0                Average of Jitter:1
   Packet Loss Unknown:0                jitter out value:0.7489559              
   jitter in value:0.6627117            NumberOfOWD:0 
   OWD SD Sum:81                        OWD DS Sum:62        
   TimeStamp unit: ms  
# Verify that a trap message is generated in the trap buffer.
<Quidway> display trapbuffer
Trapping buffer configuration and contents : enabled                            
Allowed max buffer size : 1024                                                  
Actual buffer size : 256                                                        
Channel number : 3 , Channel name : trapbuffer                                  
Dropped messages : 0                                                            
Overwritten messages : 0                                                        
Current messages : 3
#Jul  9 00:28:34 2009 Quidway  NQA/4/RTDTHRESHOLD:OID 
1.3.6.1.4.1.2011.5.25.111.6.16 NQA entry RTD over threshold. (OwnerIndex=admin, 
TestName=jitter)
#Jul  9 00:28:34 2009 Quidway NQA/4/SDTHRESHOLD:OID 1.3.6.1.4.1.2011.5.25.111.6.17 
NQA entry OWD-SD over threshold. (OwnerIndex=admin, TestName=jitter)    
#Jul  9 00:28:34 2009 Quidway  NQA/4/DSTHRESHOLD:OID 1.3.6.1.4.1.2011.5.25.111.6.
18 NQA entry OWD-DS over threshold. (OwnerIndex=admin, TestName=jitter)
# Verify that the NMS can receive the trap message successfully. The displayed information is
not provided here.
----End
Configuration Files
l Configuration file of Switch A
#
 sysname SwitchA
#
vlan batch 110 120
#
interface Vlanif110
 ip address 20.1.1.1 255.255.255.0
#
interface Vlanif120
 ip address 10.1.1.1 255.255.255.0
#
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management 6 NQA Configuration
Issue 01 (2011-10-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
387