Monitoring the library
The system summary
Select Monitor System > System Summary to display a summary of the status of the tape drive and the
library, and the current configuration of the library, comprising:
v Library name
v Library status (OK, Degraded, or Failed). It displays Not Ready while initializing.
v Drive status (OK, Degraded, or Failed). It displays Empty, Loading, or Ejected when the drive is empty,
loading media, or media is ejected or unloaded in the drive. It displays Cleaning when the cleaning
cartridge is in the drive, and Initializing while initializing.
v Magazine status (Open/Closed, when Magazine is enabled)
v Operator Panel LED indicators
v Number of cartridges and slot configuration
– Cartridge in the drive (0 or 1); Slots value is always “N/A”
– Number of cartridges in the active slots; Number of active slots
– Number of cartridges in the cleaning/inactive slots; Number of cleaning/inactive slots
– Number of cartridges in the I/O Station (0 or 1) when enabled; Number of I/O Station slots
– Number of cartridges in the reserved slot; Number of reserved slots
v Library firmware version
v Library serial number
Figure 80. System Summary screen
76 IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
|
|
|
|
|
|
To Next Page
Loading...
