Applying an RID tag to a library
A RID (Repair Identification) tag maintains the original serial number record and WWN of the library to
ensure that your warranty coverage, if applicable, is not interrupted. The tag is important for customer
inventory accuracy. Follow the instructions on the RID tag precisely.
1. Copy the machine type (MT) and serial number (SN) from the old library onto the Repair ID tag (▌1▐
in Figure 157).
2. Copy the worldwide name (WWN) from the old library onto the WWN ID label (▌2▐ in Figure 157).
3. Place the RID tag close to, but not covering, the serial number on the new library. Repeat for the
WWN ID label.
Figure 157. RID tag
Removal and replacement procedures 157
To Next Page
Loading...
