IBM TS2900 - Attaching the Feet

2. Turn the library over and attach the feet ▌1▐ to the designated locations on the bottom of the library
(Figure 136). Return the library to the upright position.
3. Position the deskside cover ▌2▐ in the correct orientation over the library chassis and attach the
cover to the library with 3 flat-head screws ▌6▐ on each side (Figure 137).
a29z0009
6
5
3
6
Figure 135. Attaching the side rails to the library chassis
a29z0013
1
1
Figure 136. Attaching the feet
a29z0011
2
6
6
Figure 137. Attaching the cover to the library chassis (side screws)
Removal and replacement procedures 145