IBM TS2900 - Operations

Operations
“The Operator Panel” on
page 62
Monitoring the Library “Configuration settings” on page 63
“Current information” on page 63
“Firmware revision” on page 64
Managing the Library “Unlocking the I/O station” on page 64
“Unlocking the cartridge magazine” on page 65
“Moving cartridges” on page 65
“Unloading the drive” on page 65
“Cleaning the drive manually” on page 66
“Conducting a library inventory” on page 66
“Taking the library online and offline” on page 66
“Powering down the library” on page 67
“Shipping the library” on page 67
“Rebooting the drive” on page 67
“Rebooting the library” on page 67
“Logging out of the library” on page 68
Configuring the Library “Configuring auto cleaning” on page 68
“Configuring the number of active slots” on page 68
“Configuring the library access mode” on page 69
“Configuring date and time settings” on page 70
“Configuring network settings” on page 71
“Configuring Operator Panel settings” on page 72
“Configuring Web GUI Settings” on page 72
“Setting the library to factory defaults” on page 73
Servicing the Library “Checking the library error status” on page 73
“Running library verify diagnostic procedures” on
page 73
“Running drive diagnostic procedures” on page 74
© Copyright IBM Corp. 2009, 2018 61