IBM TS2900 - Attaching Side Rails to the Library Chassis

Table 14. Deskside Assembly Kit (continued)
Number Part Number Quantity Description Part
▌5▐ 45E3801 1
Bracket, 1U library left
rail
a29z0038
▌6▐ 45E3802 12
Screw, cross-recessed
flat head, M3x6 (6 for
securing left and right
rails to library; 6 for
securing sides of cover
to library)
a29z0039
To install the deskside cover on your library:
1. Verify that your deskside kit includes all the necessary contents. See Table 14 on page 23.
2. Attach the left ▌5▐ and right ▌3▐ rails to the chassis with 3 flat-head screws ▌6▐ on each side
(Figure 17).
3. Turn the library over and attach the desktop feet ▌1▐ to the designated locations on the bottom of the
library (Figure 18 on page 25). Return the library to the upright position.
a29z0009
6
5
3
6
Figure 17. Attaching side rails to the library chassis
24 IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572