IBM TS2900 - Library Sense Data

Library sense data
“Library sense data” lists the Additional Sense Codes (ASC) and Additional Sense Code Qualifiers
(ASCQ) associated with the reported Sense Keys.
A sense key of 00h (no sense) has no ASC/ASCQ associated with it. A few ASC/ASCQs are associated
with more than one sense key. The sense keys that can give a particular ASC/ASCQ are indicated within
the Sense Key column.
Table 39. Library sense data
Sense Key ASC ASCQ Description
No Sense (00) 00 00 No sense
30 03 Cleaning cartridge installed
Recovered Error (01) 5B 02 Log counter at maximum
Not Ready (02) 04 00 Logical unit not ready, cause not reportable
04 01 Logical unit is in process of becoming ready
04 03 Manual intervention required
3A 02 Media not present (tray open)
80 05 During reprogramming mode
Hardware Error (04) 15 01 Mechanical position error
40 nn Diagnostic failure on component nn (80h-ffh)
44 00 Internal target failure
53 00 Media load or eject failed
80 07 NVRAM failure
Illegal Request (05) 1A 00 Parameter list length error
20 00 Invalid command operation code
21 01 Invalid element address
24 00 Invalid field in CDB
25 00 Logical unit not supported
26 00 Invalid field in parameter list
30 00 Incompatible medium installed
3B 0D Media destination element full
3B 0E Media source element empty
3B 83 Source drive not unloaded
53 02 Media removal prevented
80 10 Drive failure
80 20 Exchange slot full
80 21 Cartridge wrong insertion
Unit Attention (06) 28 00 Not-ready to ready transition, media may
have changed
28 01 Import or export element accessed
29 00 Power ON occurred
2A 02 Log parameter changed
3F 01 Microcode has been changed
41 FE Drive error message detected*
208 IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572