IBM TS2900 - Manually Removing Tape Cartridge

3. Attach the left ▌1▐ and right ▌2▐ rear brackets to the left ▌5▐ and right ▌6▐ front rails with 2
round-head screws 10 on each side (Figure 146).
Note: Run the hook-and-loop fastener strap through the slot on the right rear bracket and attach it
back upon itself.
4. Slide in the rear rails ▌7▐ from back to front to create the rail assemblies. Ensure that the screw holes
face outwards (Figure 147 on page 151).
a29z0017
8
3
8
4
Figure 145. Attaching the front brackets to the library chassis
a29z0019
5
6
10
1
2
12
Figure 146. Attaching the rear brackets to the rails
150 IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572