12. Remove the flat-head screws ▌8▐ to remove the left ▌3▐ and right ▌4▐ front brackets from the front of
the library chassis (Figure 134).
Installing the library on a desktop
For details on the deskside kit components, see “Installing the Deskside Cover” on page 23.
1. Attach the left ▌5▐ and right ▌3▐ rails to the chassis with 3 flat-head screws 6 on each side
(Figure 135 on page 145).
Figure 133. Removing screws at the front of the library
Figure 134. Removing the front brackets from the library chassis
144 IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
To Next Page
Loading...
