– SSL for web (Enable or Disable)
v IPv4 Settings
– IPv4 address
– Subnet mask
– Gateway address
– DHCPv4 (Enabled or Disabled)
v Column n, Tier n Information
– Slot type (Storage, I/O station, or Cleaning)
– Element address
v Drive Information
– Status (OK, Degraded, or Failed). Drive Status displays Empty, Loading, or Ejected when the drive is
empty, loading media, or media is ejected/unloaded in the drive. It displays Cleaning when the
cleaning cartridge is in the drive, and Initializing while initializing.
– Vendor ID
– Product ID
– Serial number
– F/W version (firmware)
– World Wide ID (node name)
– Encryption method (None)
v Cartridge Information
– Media status (OK, Degraded, or Failed)
– Cartridge label that is detected by the bar code reader
– Encryption setting for data cartridges (Not encrypted, Encrypted or Unknown)
– Remain - Number of uses left for cleaning cartridges. When a cleaning cartridge is added to the
library (I/O station or cleaning slot) the remaining uses is displayed as 50. The actual remaining
uses are updated when the cleaning cartridge is loaded into the tape drive. See “Cleaning cartridge”
on page 111.
– Write protect (Yes or No)
Note: Write protect status is only detected and displayed when a cartridge is in a drive.
v Accessor Information
– Status (OK, Degraded, or Failed)
78 IBM TS2900 Tape Autoloader: Setup, Operator, and Service Guide Machine Type 3572
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To Next Page
Loading...
Need help?
General