IDEC SmartRelay functions
4.4 Special functions list - SF
IDEC SmartRelay Manual
202
5. Confirm your entries with O.
6. Press to position the cursor on the Priority line.
7. Increase the priority by pressing .
8. Press to position the cursor on the Msg. Dst line.
9. Press or to toggle through the three choices for message destination: BM, TDE, or
Both.
10.Press to position the cursor on the Tick Type line.
11.Press or to select either C-C or L-L for the Tick Type.
12.Enable or disable ticking for each line of the message text by pressing . IDEC
SmartRelay displays as follows:
13.To choose between No and es to define whether Line 1 ticks, press or
14.Press to move the cursor to the second line, and press or to choose between No
and es for Line 2. Configure line ticking for lines 3, 4, 5 and 6 in the same way as for
lines 1 and 2.
15.Position the cursor on the eb Show line by pressing . Press or to select between
No and es for eb Show.
16.Press O
to confirm the complete message text configuration.
0HVVDJHGHVWLQDWLRQ,'(&6PDUW5HOD\%DVLF0RGXOH
%
$FN
0VJ7H[W
3ULRULW\
7LFN7\SH
0VJ'VW
1R
&&
7'(
7LFN7\SHFKDUDFWHUE\FKDUDFWHU&&RUOLQHE\OLQH//
%
$FN
0VJ7H[W
3ULRULW\
7LFN7\SH
To Next Page
Loading...
