IDEC SmartRelay Manual
73
Programming IDEC SmartRelay
3.7 riting and starting the circuit program
Deactivating the password from Base Module
To deactivate the password to allow, for example, another user to edit your circuit program,
you must know your current password (in our example ).
To deactivate the password, follow these steps in the programming menu:
1. Move the cursor to
: Press or
2. Confirm : Press O
Enter your current password as described in steps 5 to 7 above. Confirm your entries with
O
.
3. Move the cursor to
: Press or
4. Confirm
: Press O
The display now shows:
Alternatively, you can also select
and clear the password by leaving the input box
blank.
5. Press any key and IDEC SmartRelay returns to the programming menu. ou have now
cleared the password.
N
ote
This action disables the password prompt, and thus permits access without a password.
Leave the password deactivated for uicker progress through the remaining exercises and
examples.
3URJ1DPH
To Next Page
Loading...
Need help?
General
