iTero Element 2 - Using the Scan Timer; Sending the Scan; Figure 94: Scan Timer Button on the Toolbar and Scan Time; Figure 95: Sending the Scan

© 2019 Align Technology, Inc. All rights reserved.
75
iTero Element 2 and iTero Element Flex User Manual
4.3.6 Using the scan timer
The scan timer enables you to see how long it took to scan the model.
To view the scan time:
On the toolbar, click the button.
The scan time is displayed.
Figure 94: Scan timer button on the toolbar and scan time
Click OK to close the window.
4.4 Sending the scan
After you have scanned the patient and viewed the case to ensure that no data is missing, you can send the
scan to the lab or to storage, depending on the case type.
To send the scan:
Tap on the toolbar to send the case, including the screenshots if any.
Add your signature to authorize the order and then tap Confirm and Send.
Figure 95: Sending the scan
If required, select the Save Signature check box to save your signature for authorizing future cases.