Johnson Controls VS3 Series User Manual

198
Appendix A—Description of parameters
VARIABLE SPEED DRIVE SERIES III LIT-12012999—June 2018 www.johnsoncontrols.com
Code Modbus ID Parameter Application RO/RW
P12.2.7 1562 FB Process Data Output 7 Sel 1,2,3 RW
Use this parameter to accessing the Fieldbus Data Output Selections, parameter/monitor ID's can be
assigned to these registers and then read over the desired Fieldbus Network Word for Process Data.
Default Values for Process Data Out in Fieldbus(build table for below values)
Process Data Out1 - Output Frequency = ID 1
Process Data Out2 - Motor Speed = ID 2
Process Data Out3 - Motor Current = ID 3
Process Data Out4 - Motor Torque = ID 4
Process Data Out5 - Motor Power = ID 5
Process Data Out6 - Motor Voltage = ID 6
Process Data Out7 - DC Link Voltage = ID 7
Process Data Out8 - Active Fault Code = ID 28
See Communication Manual for more details.
P12.2.8 1563 FB Process Data Output 8 Sel 1,2,3 RW
Use this parameter to accessing the Fieldbus Data Output Selections, parameter/monitor ID's can be
assigned to these registers and then read over the desired Fieldbus Network Word for Process Data.
Default Values for Process Data Out in Fieldbus(build table for below values)
Process Data Out1 - Output Frequency = ID 1
Process Data Out2 - Motor Speed = ID 2
Process Data Out3 - Motor Current = ID 3
Process Data Out4 - Motor Torque = ID 4
Process Data Out5 - Motor Power = ID 5
Process Data Out6 - Motor Voltage = ID 6
Process Data Out7 - DC Link Voltage = ID 7
Process Data Out8 - Active Fault Code = ID 28
See Communication Manual for more details.
P12.2.9 2415 Standard Status Word Bit0 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit0 to be read over the communication Standard
Status Word.
P12.2.10 2416 Standard Status Word Bit1 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit1 to be read over the communication Standard
Status Word.
P12.2.11 2417 Standard Status Word Bit2 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit2 to be read over the communication Standard
Status Word.
P12.2.12 2418 Standard Status Word Bit3 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit3 to be read over the communication Standard
Status Word.
P12.2.13 2419 Standard Status Word Bit4 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit4 to be read over the communication Standard
Status Word.
P12.2.14 2420 Standard Status Word Bit5 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit5 to be read over the communication Standard
Status Word.
P12.2.15 2421 Standard Status Word Bit6 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit6 to be read over the communication Standard
Status Word.
P12.2.16 2422 Standard Status Word Bit7 Function Select 1,2,3 RW
Use this parameter to select status indication of this bit7 to be read over the communication Standard
Status Word.
P12.3.1.1 586 RS485 Comm Set 1,2,3 RW
This parameter to select the communication protocol for RS-485 terminals.
0 = Modbus RTU
1 = BACnet MS/TP
2 = SA Bus
P12.3.2.1 587 Slave Address 1,2,3 RW
Use this parameter set the slave address for RS-485 communication.

Johnson Controls VS3 Series Specifications

General

Brand	Johnson Controls
Model	VS3 Series
Category	Inverter
Language	English