Table 66: DHCP Service Configuration Pages Summary for EX4300 Switches (continued)
Your ActionFunctionField
To enable this option, select the check box.Specifies the circuit type that is linked with the
username.
Circuit Type
To enable this option, select the check box.Name of the interface.Interface Name
To enable this option, select the check box.Specifies the MAC address of the client PDU
that is linked with the username during the
subscriber authentication process.
Mac Address
To enable this option, select the check box.Specifies that the logical system name that is
linked with the username during the subscriber
authentication process.
Logical System Name
To enable this option, select the check box.Specifies the payload of Option 60 (Vendor
Class Identifier) from the client PDU be linked
with the username during the subscriber
authentication process.
Option-60
To enable this option, select the check box.Specifies the routing instance name that is
linked with the username during the subscriber
authentication process.
Routing Instance Name
Option-82
To enable this option, select the check box.Specifies the name of the client used by the
DHCP server to index its database of address
bindings. The name must be unique to the client
within the subnet on which the client resides.
Circuit Identifier
To enable this option, select the check box.Specifies the remote ID option in the client.Remote Identifier
Type the domain name.Specifies the domain name that clients must
use to resolve hostnames.
Domain Name
Type the prefix.Specifies the prefix to the username as defined
by the user.
User Prefix
Type the delimiter.Specifies a character that separates
components that make up the username.
Delimiter
Related
Documentation
Understanding DHCP Services for Switches•
• Monitoring DHCP Services on page 205
Copyright © 2017, Juniper Networks, Inc.130
J-Web Application Package User Guide for EX Series Switches, Release 14.1X53-A1
To Next Page
Loading...
Need help?
General
