Juniper EX3200 Hardware Guide

Table 41: Optical Interface Support for Fast Ethernet SFP Transceivers in EX3200
Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-LX40KModel number100BASE-LX40K
100 MbpsRate
LCConnector type
DualFiber count
1310 nmTransmitter wavelength
–5 dBmMinimum launch power
0 dBmMaximum launch power
–32 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
40 km (24.8 miles)Distance
Not availableDOM support
Junos OS for EX Series switches, Release 10.0 or laterSoftware required
YesSupport for Virtual Chassis
configuration
99Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications

Juniper EX3200 Specifications

General

Model	EX3200
Rack Units	1U
Layer Support	Layer 2 and Layer 3
Junos OS	Yes
Maximum VLANs	4093
DRAM	512 MB
Flash Memory	256 MB
Ports	24 or 48
Uplink Ports	4 SFP
Power Supply	AC or DC
MAC Address Table Size	16, 000 entries
Dimensions (W x D x H)	17.4 x 14.4 x 1.7 inches
Weight	12.3 lb (5.6 kg)
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 85% (non-condensing)