Juniper EX3200

Table 41: Optical Interface Support for Fast Ethernet SFP Transceivers in EX3200
Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-1FE-LHModel number100BASE-LH (or
100BASE-ZX)
100 MbpsRate
LCConnector type
DualFiber count
1310 nmTransmitter wavelength
–5 dBmMinimum launch power
0 dBmMaximum launch power
–32 dBmMinimum receiver sensitivity
–8 dBmMaximum input power
SMFFiber type
9/125 µmCore/Cladding size
–Modal bandwidth
80 km (49.7 miles)Distance
Not availableDOM support
Junos OS for EX Series switches, Release 10.0 or laterSoftware required
YesSupport for Virtual Chassis
configuration
Copyright © 2016, Juniper Networks, Inc.100
EX3200 Switch Hardware Guide