Juniper EX3200 Hardware Guide

Table 59: Chassis Component Alarm Conditions on EX3200
Switches (continued)
Remedy
Alarm
SeverityAlarm Condition
Chassis
Component
Check the RPS connection.Major
(red)
RPS is
disconnected.
Redundant
power
system
(RPS)
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major
(red)
RPS fan has failed.
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major
(red)
RPS power supply
has failed.
Check the reason for power supply failure.Minor
(yellow)
RPS is backing up
the switch for the
first time.
•
Check whether a cable is connected to
the management Ethernet interface, or
whether the cable is defective. Replace
the cable if required.
•
If you are unable to resolve the problem,
open a support case using the Case
Manager link at
http://www.juniper.net/support/ or
call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the
United States).
Major
(red)
Management
Ethernet link is
down.
Management
Ethernet
interface
Copyright © 2016, Juniper Networks, Inc.224
EX3200 Switch Hardware Guide

Juniper EX3200 Specifications

General

Model	EX3200
Rack Units	1U
Layer Support	Layer 2 and Layer 3
Junos OS	Yes
Maximum VLANs	4093
DRAM	512 MB
Flash Memory	256 MB
Ports	24 or 48
Uplink Ports	4 SFP
Power Supply	AC or DC
MAC Address Table Size	16, 000 entries
Dimensions (W x D x H)	17.4 x 14.4 x 1.7 inches
Weight	12.3 lb (5.6 kg)
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 85% (non-condensing)