Table 59: Chassis Component Alarm Conditions on EX3200
Switches (continued)
Remedy
Alarm
SeverityAlarm Condition
Chassis
Component
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Minor
(yellow)
Devicebooted from
backup root.
Media
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major
(red)
/var or /config full
(only 10% free).
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Minor
(yellow)
/var or /config full
(only 25% free).
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major
(red)
Upgrade bank is
empty or corrupted.
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Minor
(yellow)
Firmware version is
not the latest.
Open a support case using the Case
Manager link at
http://www.juniper.net/support/ or call
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major
(red)
Single-bit ECC error
detected.
223Copyright © 2016, Juniper Networks, Inc.
Chapter 21: Alarms and Syslog Messages