Scanning N0
N1
N2
N3
N4
N5
N6
N7
N8
N9
N10
N11
N12
N13
N14
N15
N16
N17
N18
N19
N20
Open all - stop scanning or stepping if applicable
Close channel 1
Close channel 2
Close channel 1
Close channel 4
Close channel 5
Close channel 6
Close channel 7
Close channel 8
Close channel 9
Close channel 10
Step mode, max channel is 2
Step mode, max channel is 3
Step mode, max channel is 4
Step mode, max channel is 5
Step mode, max channel is 6
Step mode, max channel is 7
Step mode, max channel is 8
Step mode, max channel is 9
Step mode, max channel is 10
Open all - stop scanning or stepping if applicable
Scanning (cont.) N21
N22
N23
N24
N25
N26
N27
N28
N29
Scan mode, max channel is 2
Scan mode, max channel is 3
Scan mode, max channel is 4
Scan mode, max channel is 5
Scan mode, max channel is 6
Scan mode, max channel is 7
Scan mode, max channel is 8
Scan mode, max channel is 9
Scan mode, max channel is 10
Thermocouple J0
J1
J2
Type J thermocouple
Type K thermocouple
Type T thermocouple
O0
O1
Simulated reference junction (for temperature function)
Real reference junction (for temperature function)
H0 Set simulated reference junction temperature using “V”
command; 0 to 50 (°C).
Table D-1 (cont.)
Models 196/199 device-dependent command summary
Mode Command Description
Models 196/199 Commands D-5