Keithley 2700 - Getting Started

1
Getting Started
Quick Start — Of the following section topics, three can be used immediately to quickly
acquaint yourself with fundamental instrument operations. Use QS1 to familiarize
yourself with front panel controls, use QS2 to power-up the instrument and finally, use
QS3 to perform exercises to operate the instrument.
• General information — Covers general information that includes, contact
information, safety symbols and terms, inspection, and available options and
accessories.
• Model 2700 features — Summarizes the features of Model 2700.
• Plug-in switching modules — Summarizes the capabilities of the Keithley
Model
77xx series switching modules.
QS1 • Front and rear panel familiarization — Summarizes the controls and connectors
of the instrument.
• Rack mounting — Covers the options available for rack mounting the Model 2700
in a standard 19-inch rack.
QS2 • Power-up — Covers line power connection, line voltage setting, fuse replacement,
power line frequency, and the power-up sequence.
• Display — Provides information about the display of the Model 2700.
• Defaults and user setups — Lists the *RST and factory default settings, and
covers the three setup configurations available to the user.
• Remote programming information — Explains how SCPI commands are
presented in this manual.
QS3 • Quick start exercises — Provides abbreviated operating information and exercises
(front panel and remote programming) to acquaint a user with operation basics.