Keithley 2700 User Manual

H-2 KE2700 Instrument Driver Examples Model 2700 Multimeter/Switch System User’s Manual
Introduction
An IVI style Instrument Driver is provided with the Models 2700, 2701, and 2750. The
driver supports programming in LabView, LabWindows CVI, Visual Basic, and C,
Test examples provided by the KE2700 Instrument Driver are listed in Table H-1 and
Table H-2. Some of the examples demonstrate the simple command sequence examples
that are used throughout this manual. These examples include a reference to appropriate
manual section in the "References" column of the tables.
Visual Basic and CVI (C) examples
Table H-1 lists the Visual Basic and CVI (C) examples and “Use Cases” that are provided
with the KE2700 Instrument Driver. By default, Visual Basic examples are installed in
\Program Files\Keithley Instruments\KE2700\Examples\VB and CVI examples are
installed in \Program Files\Keithley Instruments\KE2700\Examples\CVI.

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD