Keithley 2700 User Manual

7
Scanning
• Scanning fundamentals — Explains channel assignments (slot/channel
programming format), the difference between sequential and non-sequential scans,
and the basic scan process. Block diagrams (known as trigger models) are provided
to help explain the STEP and SCAN operations.
• Scan configuration — Provides the step-by-step procedures to configure a simple
scan or an advanced scan. Covers other scan options, including delay, monitor, auto
configuration, saving setups, and auto scan.
• Scan operation — Provides the step-by step procedures to perform a basic scan, a
manual/external trigger scan, and a monitor scan.
• Remote programming — scanning — Provides the commands used for scan
operation and includes a simple scanning programming example. Also summarizes
various aspects of remote scan operation.
• Scanning examples — Provides a couple of typical scan operation examples (front
panel and remote programming).

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD