Keithley 2700 User Manual

9
Limits and Digital I/O
• Limits — Explains how to perform limit tests on measured readings.
• Digital I/O — Covers the digital I/O port. Explains how the five digital outputs
respond to the results of limit tests.
• Remote programming — limits and digital output — Summarizes the
commands to perform limit tests and control the digital I/O port.
• Application — sorting resistors — Provides an application to test the tolerances
of 100
Ω resistors. Provides the digital output response to the various pass/fail
combinations of the limit tests.

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD