Keithley 2700 User Manual

Model 2700 Multimeter/Switch System User’s Manual Getting Started 1-3
Inspection
Model 2700 was carefully inspected electrically and mechanically before shipment. After
unpacking all items from the shipping carton, check for any obvious signs of physical
damage that may have occurred during transit. (There may be a protective film over the
display lens, which can be removed). Report any damage to the shipping agent
immediately. Save the original packing carton for possible future shipment. The following
items are included with every Model 2700 order:
• Model 2700 with line cord.
• Safety test leads (Model 1751).
• Accessories as ordered.
• Hardware for rack mounting.
• Certificate of calibration.
• Model 2700 User’s Manual (P/N 2700-900-00).
• Manual Addenda (pertains to any improvements or changes concerning the
instrument or manual).
• Software CD containing the following:
• TestPoint Runtime – Provides basic data logging capabilities. This can be
modified with the TestPoint application development package (optional
software).
• KE2700 IVI Instrument Driver – Provided for programmers, designed for use
with application development environments.
Optional “Software” available from Keithley is summarized on page 1-6.
If an additional manual is required, order the appropriate manual package. The manual
packages include a manual and any pertinent addenda.
Options and accessories
Plug-in switching modules
NOTE Table 1-1 provides a side-by-side comparison of the following Keithley
switching modules. All multiplexer modules can be configured as two
independent multiplexers.
NOTE The Model 77xx Series Switching Modules Instruction Manual provides
operating and service information for the switching modules. This manual is
supplied with each switching module.
Model 7700 — This differential multiplexer provides 20 channels of 2-pole input, or
10
channels of 4-pole input. The internal cold junction allows direct-connection of
thermocouples. It also has two 2-pole channels used exclusively for current input.

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD