Keithley 2700 User Manual

4-20 Range, Digits, Rate, Bandwidth, and Filter Model 2700 Multimeter/Switch System User’s Manual
Remote programming — filter
Filter commands
The filter commands are listed in Table 4-6. Additional information on these commands
follow the table.
NOTE Query commands are not included in Table 4-6. All commands for the SENSe
subsystem are provided in Table 15-5.
Table 4-6
Filter commands
Commands
1, 4
Description
5
Default
DCV filter commands
[SENSe[1]] Optional root command.
:VOLTage[:DC]:AVERage:TCONtrol <name> Select filter type; <name> = MOVing or
REPeat.
(Note 2)
:VOLTage[:DC]:AVERage:WINDow <NRf> Set filter window in %; <NRf> = 0 to 10. 0.1
:VOLTage[:DC]:AVERage:COUNt <n> [, clist] Specify filter count; <n> = 1 to 100. 10
:VOLTage[:DC]:AVERage:STATe <b> [, clist] Enable or disable the filter. (Note 3)
ACV filter commands
[SENSe[1]] Optional root command.
:VOLTage:AC:AVERage:TCONtrol <name> Select filter type; <name> = MOVing or
REPeat.
(Note 2)
:VOLTage:AC:AVERage:WINDow <NRf> Set filter window in %; <NRf> = 0 to 10. 0.1
:VOLTage:AC:AVERage:COUNt <n> [, clist] Specify filter count; <n> = 1 to 100. 10
:VOLTage:AC:AVERage:STATe <b> [, clist] Enable or disable the filter. (Note 3)
DCI filter commands
[SENSe[1]] Optional root command.
:CURRent[:DC]:AVERage:TCONtrol <name> Select filter type; <name> = MOVing or
REPeat.
(Note 2)
:CURRent[:DC]:AVERage:WINDow <NRf> Set filter window in %; <NRf> = 0 to 10. 0.1
:CURRent[:DC]:AVERage:COUNt <n>
[, clist]
Specify filter count; <n> = 1 to 100. 10
:CURRent[:DC]:AVERage:STATe <b> [, clist] Enable or disable the filter. (Note 3)
ACI filter commands
[SENSe[1]] Optional root command.
:CURRent:AC:AVERage:TCONtrol <name> Select filter type; <name> = MOVing or
REPeat.
(Note 2)
:CURRent:AC:AVERage:WINDow <NRf> Set filter window in %; <NRf> = 0 to 10. 0.1
:CURRent:AC:AVERage:COUNt <n> [, clist] Specify filter count; <n> = 1 to 100. 10
:CURRent:AC:AVERage:STATe <b> [, clist] Enable or disable the filter. (Note 3)

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD