Keithley 2700 User Manual

11
Status Structure
• Overview — Provides an operational overview of the status structure for the
Model
2700.
• Clearing registers and queues — Covers the actions that clear (reset) registers and
queues.
• Programming and reading registers — Explains how to program enable registers
and read any register in the status structure.
• Status byte and service request (SRQ) — Explains how to program the Status
Byte to generate service requests (SRQs). Shows how to use the serial poll
sequence to detect SRQs.
• Status register sets — Provides bit identification and command information for
the four status register sets: Standard Event Status, Operation Event Status,
Measurement Event Status, and Questionable Event Status.
• Queues — Provides details and command information on the Output Queue and
Error Queue.

Keithley 2700 Specifications

General

Type	Digital Multimeter
Measurement Functions	DC Voltage, AC Voltage, DC Current, AC Current, Resistance, Frequency, Temperature
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Temperature Range	-200°C to +1372°C
Display	Vacuum Fluorescent Display
Connectivity	IEEE-488, RS-232
Channels	10
Power Supply	100V to 240V AC, 45Hz to 66Hz
DC Current Range	10 µA to 3 A
AC Current Range	10 µA to 3 A
Temperature Measurement	Thermocouple, RTD